thick door kit 55-60mm screw on full spindle 8mm wc brushed steel

Square spindle for door thickness extension
thick door kit 55-60mm screw on full spindle 8mm wc brushed steel
Art. No. 012190471

Finish
Satin stainless steel
Direction
L/R
Door thickness:
55-60mm
Country validity
GermanyAustria
Article number
012190471
EAN
4250214585312

55.11

MSRP (based on german VAT)*

55.57

MSRP (incl. VAT)*

Full spindle set for WC-sets, screw on UG3 & UG4

Complete accessory set for increased door thickness

This set is suitable for all Griffwerk door handle sets of the type:

  • screw-on technique WC


With the matching door thickness extension set, our door handles can also be used for increased door thicknesses.

What is a WC-closer?

The rosette set with WC lock is considered the classic for the bathroom. A door handle with WC lock, abbreviated WC at Griffwerk, is equipped with a rotary knob on the inside and an emergency release on the outside. With the WC lock on the inside, the room door can be locked from the inside by turning it once. In an emergency, the door can be emergency unlocked from the outside, e.g. with a coin.

Care instructions for stainless steel: Door handles, window handles and co.

High quality material with intelligent surface

GRIFFWERK does not limit itself to elegant design - we are proud of the inner values of our products. We only use stainless steel alloy 304, also known as "1.4301". Due to its composition, this high-quality steel - matt or polished - is rustproof with exceptional corrosion resistance and durability. Stainless steel forms a very thin protective passive layer, which rebuilds itself even after surface damage caused by chemical reactions.

Care spray for door handles

GRIFFWERK recommends using special stainless steel care sprays to care for and maintain the value of your stainless steel door handles and fittings. They clean intensively, have a dirt-repellent effect and thus maintain the value of your stainless steel door set, lever handles and door fittings. Please do not use any aggressive cleaning and scouring agents containing alcohol for cleaning - regardless of whether the stainless steel surface is matt, polished or shiny. Please note that the surface of the lever handle set can be damaged if it is exposed to unusual stresses, such as building dirt, sanding dust, aggressive vapors or salt water. Therefore, clean the lever handle set with a stainless steel care spray immediately after soiling.

Square spindle for door thickness extension thick door kit 55-60mm screw on full spindle 8mm wc brushed steel
Art. No. 012190471