TYPO 689

Hinged glass door (tempered safety glass)
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R

TYPO 689

Hinged glass door (tempered safety glass)

Color/Opacity: PURE WHITE/clear

clear

matt

Dimensions:
Direction:
Drill hole type: Studio/Office
Glass preparation: LA (clear-lasered/unmachined)
Country validity: Germany
Glass revolving door TYPO 689
TSG PURE WHITE clear
959x2097x8mm Studio/Office DIN R
EAN-13: 4250214553328

450.43

MSRP (based on german VAT)*



Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R
Glass revolving door TYPO 689 TSG PURE WHITE clear 959x2097x8mm Studio/Office DIN R

Hinged glass door (tempered safety glass)
TYPO 689

Art. No. 689012625

450.43

MSRP (based on german VAT)*

Color/Opacity: PURE WHITE/clear

clear

matt

Dimensions:
Direction:
Drill hole type: Studio/Office
Glass preparation: LA (clear-lasered/unmachined)
Country validity: Germany
Glass revolving door TYPO 689
TSG PURE WHITE clear
959x2097x8mm Studio/Office DIN R
EAN-13: 4250214553328

450.43

MSRP (based on german VAT)*



TYPO 689

Typographic

Your glass door as a poetic entrance to the next living room?

Whether entrance areas, kitchen or bathroom - treat yourself with typographically designed reading pleasure on your glass doors.

You can decide how much transparency you want. In the TWO SIDES version with matting on the back, glances are optimally shielded without you being aware of the light gain have to do without. Clear doors allow an open view.

Visualization of the decor shows the GRIFFWERK glass door TYPO_LD_689 laser one side in the version revolving door - DIN right - studio/office - tempered safety glass PURE WHITE

Alternative products

Even more security for your glass door?

Both toughened safety glass (TSG) and laminated safety glass (LSG) are classified as safety glass. The main difference between toughened safety glass and laminated safety glass is that the shards of a laminated safety glass pane, in case of breakage, stick to an internal film, which minimises the risk of injury.

Advantages

  • High safety
  • More sound insulation
  • Ideal for XL formats
  • Frosted finish possible on both sides
  • Highest opacity possible
  • More aesthetics
  • Rich sound when closing
The illustration shows a lasered glass revolving door made of laminated safety glass with Bobby Car in the foreground.

Glass doors

Glass revolving doors are becoming more and more trendy and are the stars among doors: they open up rooms and perspectives. Glass doors provide living rooms with light, allow wide lines of sight and make living areas appear friendlier, brighter and altogether larger. A revolving door made of glass is the optimal alternative to a revolving door made of wood.

What is the DIN direction for doors?

The DIN direction indicates in which direction a door opens. Do you want to find out which DIN direction is the right one for you? Then imagine that you are standing in front of the door opening towards you. The hinge side determines the DIN direction.

If the hinges are on the right, it is a DIN right-hand door.

If the hinges are on the left, your door is a DIN left door.

What is the tape side and the tape opposite side?

Door hinges connect a door to the door frame and at the same time enable a turning movement. The hinge side is the side on which the door hinges are located. The opposite hinge side is the side opposite the door hinges.

Pure White

White glass has a particularly noble effect and is characterised by a bright lighting effect in modern rooms. The green or grey tinge present in the product range is reduced to a minimum here. With PURE WHITE from Griffwerk, colour-neutral and flexible room design is guaranteed. White tones and daylight are expressed in a particularly natural way.

 

Clear or rather matt glass?

Natural daylight and bright rooms - that is the advantage that clear glass brings. In contrast to matt glass surfaces, an open view with natural light incidence is made possible. Laser motifs look brilliant on clear glass doors.

 

What is Laser One Side?

  • ONE SIDE means one-sided processing of the all-glass door with laser technology.
  • Here a clear glass blank is used
  • The transparency of the door is maintained
  • Depending on the incidence of light, the lasered area scores with its high luminosity
  • One Side is very noble and stylish

Fascination Laser Technology

Special lasers engrave filigree Lines into the glass surface. Point by point and precisely controllable, detailed images, patterns and lettering as well as finely graduated gradients can be transferred to the Glass. Our laser places microscopically small pixels next to each other for this purpose, so that photorealistic results can be achieved. The recessed engravings change the reflection of light. Lasered Glass doors remain transparent. The TWO SIDES option with satin finish on the back provides more privacy.

Laser doors from Griffwerk meet ESG standard

GRIFFWERK glass doors made of toughened safety glass ("ESG") meet all requirements for applied laser technology according to the German Institute for Building Technology (DIBT). Since then, GRIFFWERK has been allowed to mark all glass doors with the ESG test stamp, which complies with the DIN EN 12150 standard. The stamp is placed inconspicuously on the hinge side of the glass edge. We are proud to be able to offer you tested safety.


How do I clean a revolving glass door?

To clean the surfaces of interior revolving glass doors, warm water is sufficient. Please use a sponge or a soft, lint-free cloth for this purpose. Clean over a large area and not selectively.

If any remaining dirt such as fingerprints is still visible on the revolving door, you can also use commercially available glass cleaners (foam cleaners). Please do not use any abrasive, corrosive, acidic or alkaline cleaning agents. They attack the glass surface and can thus be the cause of scratches. You can wipe excess water dry with a microfibre cloth. If glass is in contact with water for a longer period of time, stubborn limescale residues can form.

With laminated glass doors, make sure that the edge seal does not come into contact with water, otherwise moisture and the cleaning agent can penetrate the laminate.

Attention

Please do not use any scratching tools, razor blades or scrapers. They can leave visible and irreparable scratch marks on the surface.

Particular attention should be paid to this with satinised and lasered surfaces

To avoid abrasion of the surface structure, do not apply too much pressure. To avoid the so-called cloud formation, rub your glass door dry over a large area with a microfibre cloth. Do not use paper or cellulose cloths. They cause too much abrasion.